GEOTECHNICAL TESTING AND DESIGN
Multi-Lynx has completed numerous projects for which a variety of
geotechnical testing and design were required.  We routinely perform
geotechnical engineering services for foundation and structural distress
investigations, using such methods as the Standard Penetration Test (SPT),
the Cone Penetration Test (CPT), the Field Vane shear Test (VST), the
Dilatometer Test, etc., and such non-destructive testing procedures as
the Ground Penetrating Radar (GPR).  We also provide recommendations for foundation design and structural distress remediation.

In addition, we are able to develop designs for embankment slopes,
retaining walls and other structures associated with the built
environment.

The Multi-Lynx advantage:

  • Flexible and Responsive to Client Concerns

  • Breadth of Scope in Professional Services

  • Cost Conscious

________________________

PLANNING AND ENGINEERING SERVICES 


Project Task Orders
1.   Project Management and Coordination
2.   Subsurface Investigations
3.   Specifications and Cost Estimates
4.   Engineering Services During Construction
                                                    

Phase II: Rental Units
              




Phase III: Rental Units

Multi-Lynx Companies, Inc. was retained to provide planning, geotechnical engineering investigation, stormwater management, and construction management services for Phase II of the Crawford Square Development project. This project consisted of large-scale infrastructure development and improvements that involved activities such as drilling and test borings, recommendations for foundation design, demolition, site preparation, stormwater management, as well as construction inspection, management, and supervision.


Top

  
 

 

 

 

 

 

241 Fourth Avenue, Pittsburgh, Pa 15222

 Phone: 1.888.798-4113    Fax: 1.888. 798.4114

Copyright © 2007 Multi-Lynx Companies, Inc.